A Flat Roof Can Still Be Hurt by Wind
These past weeks have seen many wind-related damage. Roofs can be easily blown off when winds are at up to 20 to 30 mph. Flat roofs are still vulnerable to this. This is why roofing in San Antonio is so important.
PVC roofing
With PVC roofing materials, your roof will be water-resistant from the very first day it's installed. If not, you should make sure you have an assurance on the workmanship provided by your roofing contractor. For flat roofs in general it is vital to ensure that you have a proper drainage system in place. A failure to take this step could cause ponding water to form. It is recommended to check your roof after an event for obvious damage. In this way you can spot damage before it becomes an even bigger and more expensive issue. Because the majority of PVC roofs are made of prefabricated materials, there is less of a requirement to use field seaming. The more seaming in the field, the more vulnerable the roof will be to water intrusion. There is always room for human error in this process, It is recommended to find an expert roofing company in the area around you to accomplish this.https://www.google.com/maps?cid=11932542862927843444
Read More:
Can flat roofs get wind damage?
The short answer is yes Flat roofs aren't invulnerable to damage from wind. Although it's less likely to happen, it's likely. A roof tear can result in it. It could result from any foreign object that punctures your roof. If the roof's not properly secured, wind damage might occur. A warranty on workmanship may be offered depending on the firm.
It is also possible to have wind uplift happening on the roof. This occurs when the wind pressure over the building is decreased and the pressure rises inside the building. The pressure results in the roof being pulled up and loosen. For more info, visit our article on wind damage.
Different types of materials can be Utilized
There are a myriad of materials you can choose from to make a flat roof. TPO, EPDM and PVC are all possibilities. More information on the different types of roofing material can be found here. When it comes to wind destruction, PVC it a great option to avoid wind damage. Wind can tear roofs and then tear them further. When you have PVC, PVC material this is uncommon. The PVC material will take care of itself in the event that it tears. This can give you time to call your roofer for repairs and can save you a lot of cash in the future.
EPDM roofs and TPO roofs are not able to provide the same level of protection. If there is a crack in a TPO roof, the wind will stretch it out and expose the material underneath. This is due to the formula changing for the material multiple times over the years. A EPDM roofing system can be damaged more easily than PVC. However it can be patched. Shield Roofing is the only choice you can count on.
If, in the end you believe you have sustained damage to your roof, give your roofing contractor to call. They will be able to evaluate the damage and perform the correct repairs. There is a chance that you could qualify for an assurance. If you require a no-cost estimate or estimate, give Royalty a call roofing contractors san Antonio or complete a free estimate request here.
roofing contractor pleasanton
central texas metal roofing seguin
roofing universal city tx
commercial roofers san antonio tx
san antonio metal roofing
Shield Roofing
16272 San Pedro Ave, San Antonio, TX 78232, United States
+1 210 348 3680